Demo & Refurbished Models for Sale
Great Pricing on Refurbs & Demo Systems
Availability is first come, first serve and subject to change. Listing valid 12 December 2018. Please contact email@example.com for additional technical specifications, a proposal and any additional information. Automatic Cutting Equipment Available
Spreading Equipment Available
- Eagle-EC3 Conveyor 78 x 16 (Refurbished)
- M9000 Static Table Cutting System 96 x 16 (Previously Owned)
- Raptor 75x with Blue Jay Spreader (Previously Owned)
- S125 Static Table Cutting System 54 x 12 (Demo Unit)
- 72" Saber C-Series 250E with 12" Screen, Slightly Used
- Blue Jay 72", 66" Pull Off
- ES-660 70"
- ES-1800 Demo system
8 ft. (2.44m) 12 ft. (3.66m) 16 ft. (4.88m) 20 ft. (6.10m) 36 ft. (10.97m)+ Please contact the factory for active cutting zone dimensions. Custom lengths available, please contact the factory for more information.
Dual-X Axis, Y-Axis & Theta Axis. X & Y-Axis Rack & Pinion Drive, Brushless Servo Motors
|Electric - Control Power/PC|
230V, 3 ph, 50/60 Hz, 5.4 kVA. Stand-alone step-down/up transformer required for other voltages.
|Electric - Vacuum Blower|
208/230/380/460V, 3 ph, 50/60 Hz, 7.5 HP, VFD control optional
75 – 90 psi at 15 SCFM (5.17 – 6.2 bars at 0.42cmm)
|Maximum Cutting Speed|
60 inches/second (152.4cm/second)
|Maximum X/Y Speed|
|Compressed Air Consumption|
55 – 100°F (12 – 37°C)
20 – 80% (non-condensing)
Achievable speeds and accelerations are tool, material and thickness dependent. All indicated speeds, dimensions, weights and performance data are approximate and subject to change without notice.